El Paso TX Welding Inspection Service
Things to think about if you want an excellent quality inspection in El Paso, TX. Our team helps provide the documentation need to make a complete turnover report. We are a professional business that offers expert weld inspection services all coal, natural gas, and geothermal industries, renewable energy, refineries, and the chemical processing sector. We’ve been providing premium services for decades, and you can place your trust in us to deliver as promised. All of our on-site weld inspectors have AWS CWI QC1 certification, and can serve as site quality control manager. We’ve made steady progress, and are now able to provide high-quality service without costing a lot. In order to be certain that welding is correct and effective, our inspectors perform their duties thoroughly.


Inspection Service in El Paso, TX
The welding process must take place in a suitable location; this is critical because both the position and consistency of the welding are critical. Any inconsistencies must be corrected, and they will only be passed if the code allows it. Our job is to make sure that all projects have the documentation needed to close them out, as well as to contribute to their development and preservation. If there are any weld defects, we’ll identify them and document them for future reference so that our clients can handle the repairs correctly.
Our goal is to ensure that the welded part complies with all applicable codes and regulations. For decades, we’ve been in the welding and inspection business. Our inspectors are highly skilled and experienced professionals. Boilers, natural gas, petroleum refining, metal production, chemical manufacturing, water treatment, pipe fabrication, structural steel buildings, power generation, and wastewater treatment facilities are among the industries we serve. To ensure that your welds meet or exceed industry standards, we only use the most advanced testing methods. WPS, PQR, and WPQ are just a few of the additional documents that will be accommodated.
Onsite El Paso Texas Welding Inspection
Because of many factors, it is important to have the most comprehensive welding inspection in EL Paso. Every project has a specific goal in mind, and ours is to make each welding process is efficient and appropriate for the job at hand. Inspectors are involved in the quality control process, so one of their responsibilities is to conduct a thorough examination of the welds. The term “standard” refers to rules or regulations, whereas “code” welding indicates that various manufacturing processes and procedures have been designated to ensure a desired outcome, and thus welded in a systematic manner.
As a result, a qualified inspector must inspect the weldment’s effectiveness before, during, and after it is built. Welds are sometimes NDE tested to ensure that they were properly done. If the weld fails, we will immediately notify the customer and assist them in resolving the problem. We’re well-known in the El Paso, TX area for our industrial and commercial construction experience. As a result, you can count on us to choose the most qualified AWS-CWI QC1 inspectors for the job. You may choose to have us perform an on-site quality control process as part of the service.
Our employees are highly skilled and knowledgeable in their fields. We will use the most advanced methods and tools to ensure that the welding inspection is of the highest quality. In any case, we only use qualified CWI inspectors and NDT technicians to generate timely and accurate report documentation. We’ll speak with supervisors, managers, and welders during the inspection to make sure the required consistency is being met. Please contact us as soon as possible to ensure that your welding application is suitable for your project. You may contact us toll free on the home page, click to call at the top, or scan the QR code with your mobile device.
Mechanical and Structural Special Inspection
El Paso, TX
If you need your construction welding and manufacturing projects to be special inspection certified, you’ll need an on-site special inspection inspector. Our highly trained inspectors are certified by AWS as CWI QC1 in compliance with IBC (International Building Code) and applicable engineering welding codes. We have the required certification to pass special inspections with code compliant documentation and ensure that the job was completed correctly. Our professional experiences and expertise are used to assess if the requirements and standards are being met. Our special inspector duties include counseling general contractors, subcontractors, building owners, and others. We operate as 3rd party special inspection depending on the environment. We witness and document all mechanical anchor bolt placement, material verification, calibration verification, toque verification, and special inspection welding inspections.
Welding Inspection
El Paso, TX NDT Service
If you want your construction welding and manufacturing projects to be certified, you’ll need an on-site welding inspector.
Our NDT and highly trained inspectors are certified by AWS as CWI QC1 and ASNT as SNT-TC-1A NDT Technicians in compliance with applicable welding codes. We have the required certifications to pass inspections and ensure that the job was completed correctly. Our professional experiences and expertise are used to assess if the requirements and standards are being met. Our technicians’ duties include counseling general contractors, EPCs, plant owners, and others. Depending on the environment and interests to defend, we act as a 1st party, 2nd party, or 3rd party. We can use one or a combination of the following methods for NDT procedures:

Magnetic Particle (MT Testing) and Dye Penetrant (PT Testing)
Our crack detection process, which uses magnetic particles (MT), is used by our NDT team in El Paso, Texas. This is useful for testing fine-scale cracks on or below the base metal’s surface. Surface discontinuities may also be tested with liquid penetrant or dye penetrant PT. These inspections are required by manufacturers in order to fix tanks, piping, and boilers in accordance with national code requirements.

Visual Testing (VT Testing)
Visual Testing, the most common form of welding inspection, is basically required on every project. We can inspect the integrity of a weld using a variety of welding gauges thanks to our knowledge and experience. Inspectors with VT level II will assess the overall quality of the welds to see whether they meet the minimum code requirements. It’s important to keep in mind that the VT inspection might not be the only one that your project needs. Other NDE techniques and evaluation are available from us.

Ultrasonic Testing (UT Testing) and Radiographic Testing (RT Testing)
The most common forms of volumetric testing we provide are radiography and ultrasonic testing. To test the internal weld structure, we have Ultrasound Testing (UT) and Radiographic Testing (RT) procedures, both of which are non-destructive to the component. In order to provide you with a thorough and informative weld report, our ASNT inspectors employ these common NDE methods in an acceptable manner.

Destructive Weld Testing, Welding Procedure Qualification, and Welder Qualification testing.
A destructive weld test is needed to certify the validity of the Welding Procedure Specification (WPS). A bend test is used to demonstrate that a weld’s chosen filler metal chemistry is suitable for use with a particular base metal chemistry. Bend checking weld coupons is another way to qualify welders, and it’s a requirement for a Procedure Qualification Record to be a qualified (PQR).
El Paso, TX Quality Control Welding Inspection
We’re all over the country, and we’re here in El Paso, TX, to make sure your project meets code requirements. As a result, our weld inspectors will ensure that the welded part meets quality requirements. CWI inspectors don’t take anything for granted, and they won’t let others devalue the service. We’ll perform a detailed review of all welding projects in El Paso and around the country.
We will assist you in ensuring that the welding on your project is of high quality and mechanically sound. You should depend on us to provide the project turnover documentation details you need.
Contact Us
We are pleased to have fulfilled the high quality welding inspection needs across the United States, and we are always available to conduct technical inspections. If you’ve already started welding and need it tested on a regular basis as part of the repair or maintenance routine, our inspectors have been taught how to spot potential problems. They have a lot of experience and always seem to find a way to get to the bottom of things. Find out how we can help you more effectively. Please contact us at your earliest convenience!
Visit Albuquerque, NM Location
Visit Tucson, AZ Location